[admin]

As an important equipment in modern manufacturing, CNC milling machines play a vital role in improving product quality and production efficiency with their efficient and precise processing capabilities. However, during long-term use, CNC milling machines may have some faults due to various reasons. This article will introduce the common types of faults in CNC milling machines in detail and explore the corresponding solution strategies to help operators and maintenance personnel better maintain and repair these high-precision equipment.

1. Mechanical failure

Guide rail wear or damage

Guide rails are one of the important components of CNC milling machines, and their accuracy directly affects the machining accuracy of machine tools. After long-term use, guide rails may be worn or damaged, causing unstable movement of machine tools and even jamming.

Solution: Check the wear of the guide rails regularly, and replace them immediately if severe wear is found. At the same time, keep the guide rails clean and lubricated to reduce the occurrence of wear.

Spindle failure

The spindle is the core component of the CNC milling machine, and its high-speed rotation drives the tool to perform cutting operations. Spindle failures are mainly manifested in loud noise, abnormal vibration, and excessive temperature.

Solution: For abnormal noise and vibration of the spindle, check whether the spindle bearing is damaged and replace the bearing if necessary. For the problem of overtemperature, check whether the spindle cooling system is working properly, clean the blockage in the cooling system, and ensure the circulation of the coolant.

Screw and servo motor failure

The screw and servo motor are key components for CNC milling machines to achieve precise position control. Their failure will cause the machine tool to be unable to accurately position and affect the processing accuracy.

Solution: Regularly check the operating status of the screw and servo motor. For abnormal sounds or unsmooth movement, they should be adjusted or replaced in time.

2. Electrical failure

Control system failure

The control system is the brain of the CNC milling machine, responsible for commanding the operation of the entire machine tool. Control system failure may cause problems such as the machine tool being unable to start and the program being unable to execute.

Solution: For software problems in the control system, you can try to restart the system or reinstall the software. For hardware problems, such as circuit board damage, professionals are required to check and replace it.

Sensor failure

Sensors are used to detect various states of the machine tool, such as position, speed, etc. Sensor failure will cause the machine tool to fail to respond to instructions correctly, affecting processing accuracy.

Solution: Calibrate the sensor regularly to ensure its accuracy. For damaged sensors, new sensors should be replaced in time.

Power supply problem

An unstable power supply may cause the CNC milling machine to operate abnormally or even damage the electronic components of the machine tool.

Solution: Install a voltage stabilizer or uninterruptible power supply (UPS) to ensure the stability of the power supply. At the same time, avoid using the machine tool during periods of large grid voltage fluctuations.

3. Hydraulic and pneumatic system failure

Hydraulic system leakage

The hydraulic system provides power and control pressure for the CNC milling machine. Leakage in the hydraulic system will cause pressure drop and affect the normal operation of the machine tool.

Solution: Check the hydraulic pipelines and joints regularly, and repair or replace the seals in time for the leaks found.

Insufficient air pressure

The air pressure system is mainly used for fast replacement and cleaning and purging of fixtures. Insufficient air pressure will affect the normal use of these functions.

Solution: Check whether the pressure of the air source meets the requirements, clean the filter in the air path, and ensure smooth airflow.

4. Programming and operation errors

Program error

Programming error is one of the common causes of CNC milling machine failure. Incorrect programs can cause the machine tool to perform incorrect operations or even damage the machine tool.

Solution: Improve the skill level of programmers, use simulation software to verify the program, and ensure the correctness of the program.

Improper operation

The operator's incorrect operation is also an important factor leading to CNC milling machine failure. For example, overload use, incorrect parameter settings, etc. may cause failures.

Solution: Strengthen the training of operators, formulate strict operating procedures, and avoid failures caused by improper operation.

5. Failures caused by environmental factors

Impact of temperature and humidity

Too high or too low temperature and humidity will affect the performance and life of CNC milling machines. For example, high temperature may cause electronic components to overheat, and excessive humidity may cause circuit board corrosion.

Solution: Keep the temperature and humidity in the workshop within a suitable range, and install air conditioners and dehumidification equipment to adjust environmental conditions.

Dust and pollutants

Dust and other pollutants will accumulate in various parts of the machine tool, affecting its normal operation.

Solution: Clean the machine tool regularly, especially key parts such as electrical cabinets and guide rails, to prevent dust accumulation and failure.

There are many kinds of failures of CNC milling machines, involving mechanical, electrical, hydraulic, pneumatic, environmental, and operational aspects. In order to reduce the occurrence of failures, it is necessary to start with daily maintenance, operating specifications, environmental control, and other aspects, and establish a complete maintenance system and operating procedures. At the same time, for failures to occur, corresponding solutions should be taken according to the specific situation, and professional technicians should be sought for help when necessary. Through these measures, the service life of the CNC milling machine can be effectively extended and its stable and efficient operation can be guaranteed.

As a professional CNC milling machine factory, we are well aware of the importance of stable operation of equipment for production efficiency and product quality in a high-intensity and high-precision production environment. Therefore, we are not only committed to producing high-quality CNC milling machines but also pay more attention to providing comprehensive technical support and after-sales service. From the installation and commissioning of machine tools to daily maintenance, our professional team will provide customers with detailed guidance and help. For common mechanical failures, electrical problems, and operating errors, we have a complete set of solutions and preventive measures. In addition, we will customize personalized maintenance plans according to the specific needs of customers to ensure that each CNC milling machine can perform at its best and help customers achieve efficient and accurate production goals.

http://www.bofengmachinery.com
Wuxi Bofeng International Group Co., Ltd.

[Author]

Posts